Art-Hooks
The best way to fasten your artwork
See how… in 4 easy steps…
-
Step 1
First you will need 2 female snaps, 4 M2 screws, #0 Philips bit and screw driver handle.
-
Step 1
Attach Female Snaps to the top corners of the frame using the M2 screws and #0 Philips screwdriver. If the frame is large or heavy, attach 2 more female snaps to the bottom corners of the frame for extra support.
-
Step 2
Next you will need 2 male snaps, 2 male inserts and 2 marker screws.
-
Step 2
Insert the male insert into the male snap. Then insert the marker screw into the male insert. Now slide Male Snaps, with marker screws, into each Female Snap.
-
Step 3
Using the level, position the frame on the wall and press on the top corners of the frame to mark the holes for the Male Snaps. Then set the frame aside.
-
Step 4
Slide out the male snaps, then remove the marker screws. Next you will need the 2 male snaps, 2 male inserts, 2 #6×1.5” screws, #1 Robertson bit and screwdriver handle.
-
Step 4
Find the 2 pin hole marks you just made with the marker screws. This is where the male snaps will go. Attach male snaps to the wall using the #6×1.5” screws.
-
Step 4 Alternative
If there is no stud behind the wall, you can use the 1/4” drywall anchors, 1/4” drill bit and screwdriver handle.
-
Step 4 Alternative
Use the 1/4” drill bit to make a hole, then attach the male snaps using the 1/4” drywall anchors.
Why choose Art-hooks
At Art-hooks, we want to support you, by supporting your art. We take art seriously and hope that you enjoy using our product.
Never worry about crooked frames or frames leaning from the wall. With Art-hooks your frames will always be perfectly straight and hang tight to the wall.
Also you can remove a picture frame any time for cleaning or changing the picture in the frame. Then place it back in exactly the same place you had it.
Don’t worry what’s behind the wall, with our system, you can hang a frame anywhere you like, and know that it will be supported.
